BMGJM - PERMABOND 260
- MSDS: BMGJM
- Manufacturer: NATIONAL STARCH AND CHEMICAL CO
- Product Name: PERMABOND 260
- National Stock Number: 8040-00N024852
Product Identification
Product ID:PERMABOND 260
MSDS Date:06/27/1991
FSC:8040
NIIN:00N024852
MSDS Number: BMGJM
Responsible Party
BRIDGEWATER, NJ 08807
US
Emergency Phone: 908-685-5000
Info Phone: 908-685-5000
Cage: 85091
Contractor
Telephone: 908685-5306
Cage: 85091
Ingredients
ETHYL CYANOACRYLATE
CAS: 7085-85-0
Fraction By Weight: >1%
ACGIH TLV: 2PPM;4PPM STEL (MFR)
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYE:WILL BOND EYELIDS TOGETHER.
VAPS ARE LACHRYMATORY. SKIN:IMMED BONDING OF SKIN WILL OCCUR.
FREQUENT/PRLNG CNTCT MAY IRRIT. INHAL:VAPS MAY BE IRRIT TO RESP SYS
& NASAL PASSAGES. INGEST:IMMED B ONDING OF MOUTH COULD OCCUR.
CHRONIC:NOEFTS ARE KNOWN. INHAL TOX:IRRIT TO MUC MEMBS & EYES. VAP
EXPOS (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:OF 40-60 PPM IN AIR IS VERY
OBJECTIONABLE, PRODUCING LACRIMATION, RHINORRHEA & BLURRED VISION.
LOWER CONCS, NEAR TLV, CAUSED IRRIT OF EYES & NOSE. EYE
TOX:CYANOACRYLATES WILL NOT BOND BUT MAY CAUSE CORNEAL SCRATCHING.
CYANOACRYLATE ADHESIVES RAPIDLY BOND SKIN & EYES.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYE:FLUSH W/LG AMTS OF H*2O WHILE HOLDING EYELIDS OPEN. GET
MD IMMED. SKIN:NO ATTEMPT SHOULD BE MADE TO REMOVE MATL FROM
SKIN/TO REMOVE CONTAM CLTHG, AS BONDED SKIN CAN BE EASILY TORN.
WASH W/LG VOLS OF SOAP & H*2O WHILE FLEXING BONDED SKIN PARTS.
THIS PROC WILL SLOWLY REL BONDED AREAS. DO NOT MECH REMOVE CURED
ADHESIVE/ATTEMPT TO PULL SKIN APART. INHAL:REMOVE TO FRESH AIR. IF
BRTHG IS (SUPP DATA)
Fire Fighting
Flash Point Method:SCC
Flash Point:167F,75C
Extinguishing Media:CO*2, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:CLOTHS USED TO WIPE UP SPILLS MAY CAUSE
RAPID POLYMERIZATION THAT COULD GENERATE SUFFICIENT HEAT TO IGNITE
CLOTH. COMBUST MAY REL NOXIOUS/TOX VAPS.
Accidental Release
Spill Release Procedures:SM SPILLS:WIPE UP W/CLOTH. IMMED SOAK CLOTH
W/H*2O TO POLYM ADHESIVE. CAUTION! CLOTH CONTAINING ADHESIVE MAY
UNDERGO AUTOIGNIT IF NOT SOAKED W/H*2O. LG SPILLS:FLOOD AREA
W/H*2O. WHEN CURED, REMOVE FIL M W/SCRAPER. WEAR NIOSH/MSHA APPRVD
RESP (SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STOR TEMP:<80F. STORE IN COOL, DRY
AREA AWAY FROM HEAT, SPKS OR FIRE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:AVOID PROLONGED/REPEATED BREATHING OF
VAPOR/MISTS. IF EXPOSURE MAY/DOES EXCEED OCCUPATIONAL EXPOSURE
LIMITS, USE NIOSH/MSHA APPROVED RESPIRATOR TO PREVENT OVEREXPOSURE.
Ventilation:LOCAL EXHAUST REQUIRED.
Protective Gloves:WEAR POLYETHYLENE GLOVES. DO NOT(SUPDAT)
Eye Protection:CHEM WORK GOGG.FULL LGTH FSHLD(SUPP DATA
Other Protective Equipment:DO NOT WEAR CNTCT LENSES WHEN WORKING
W/MATL. NO SPECIAL CLTHG REQD FOR LOW VOL ACTIVITY. EMER EYEWASH &
DELUGE (SUPDAT)
Work Hygienic Practices:WASH HANDS BEFORE EATING, DRINKING,
SMOKING/USING TOILET FACILITIES. REMOVE CONTAM CLTHG CAREFULLY &
WASH BEFORE REUSE.
Supplemental Safety and Health
CNDTNS (POLYM):UNCONTROLLABLE RISE IN TEMP & BUILDUP OF PRESS IN CLSD
CNTNRS. FIRST AID PROC:DFCT, GIVE O*2. IF BRTHG HAS STOPPED, GIVE
ARTF RESP. GET MD. INGEST:GET MD. SPILL PROC:FOR ORG VAPS IF NEE D
& PROT CLTHG. PROT GLOVES:WEAR RUB/CLOTH GLOVES. OTHER PROT
EQUIP:SHOWER . EYE PROT:MAY BE ADDED TO GOGGLES(FP N
Chemical Properties
Boiling Pt:B.P. Text:140F,60C
Vapor Pres:0.3 @ 68F
Vapor Density:>1
Spec Gravity:1.05
Solubility in Water:INSOLUBLE
Appearance and Odor:TRANSPARENT LIQUID; PUNGENT ODOR.
Percent Volatiles by Volume:NIL
Stability
Stability Indicator/Materials to Avoid:YES
WATER, ALKALINE MATERIALS, PEROXIDES.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:DECOMPOSES UPON HEATING TO REL TOX
FUMES OF NITROGEN OXIDES, CO & CO*2.
Conditions to Avoid Polymerization:CONTAM OF ADHESIVE W/ALKALINE MATLS,
PEROXIDES/H*2O CAN RESULT IN RAPID POLYM. IN LG QTYS, THIS COULD
LEAD TO(SUPP DATA)
Disposal
Waste Disposal Methods:WASTE DISPOSAL SHOULD BE I/A/W EXISTING FEDERAL,
STATE & LOCAL ENVIRONMENTAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.